MustangForums.com - View Single Post

smedin · 01-26-2006, 02:20 AM

A few days after the Steeda Spring install, I measured my rear axle, and if I moved it 1/8" to the right, it would be perfectly aligned. I'm having a hard time convincing myself to spend $120 to accomplish that. However, my front end is a different story. The tops of the wheels are 1/2" further inboard than the bottoms, or about 2 degrees out. Is there any way to correct that without buying any hardware? Loving the stance and the handling, BTW.

Any advice is appreciated! Thanks.

01-26-2006, 02:20 AM	#16
smedin 1st Gear Member Join Date: Dec 2005 Location: Posts: 58	RE: Lowering your 05/06 Mustang GT A few days after the Steeda Spring install, I measured my rear axle, and if I moved it 1/8" to the right, it would be perfectly aligned. I'm having a hard time convincing myself to spend $120 to accomplish that. However, my front end is a different story. The tops of the wheels are 1/2" further inboard than the bottoms, or about 2 degrees out. Is there any way to correct that without buying any hardware? Loving the stance and the handling, BTW. Any advice is appreciated! Thanks. __________________ "If it ain't broke, keep fixing it until it is." 2006 Black GT 5spd Man. Steeda Springs, FRPP S-type. Future: Tokico, Panhard, Tune...