Alpine Type R SWR-1242D 12" Car Box
#1
Sub Enclosure
Hello i wanna buy, Alpine Type R SWR-1242D 12".
I need to create a carbox for 98 Mustang (To the trunk)
Im quitting my job in factory so i need to know how should it looks as fast is possible,
I dont have any experience with it, im noob!
I would really appreciate that if someone could make a project for me.
Thank you guys
Take care
I need to create a carbox for 98 Mustang (To the trunk)
Im quitting my job in factory so i need to know how should it looks as fast is possible,
I dont have any experience with it, im noob!
I would really appreciate that if someone could make a project for me.
Thank you guys
Take care
Last edited by Juno; 01-21-2009 at 07:35 PM.
#3
I think we have one or two people a month that want a box designed for them. This isn't that kind of site and I never have really know that kind. We might run some calculations to check if you have enough space but if you want us to run out, measure our trunks, look up the specs on your subs, do the algebra to solve for the airspace minus displacement and then wipe for you you will not like my choice of paper.
#4
first if you getting type r go ported my personal opinion as box you have to look at the min max box demension on the sub and measure your trunk right now im actually making a fiberglass enclosure in my buddys accord for a w7
#5
I've head that type rs like big boxes. I've heard one in a 3 cu box tuned to 32 hz and it sounded way better than what I expected.
the measurements for my trunk were (I think) 36 wide at the closest point, 15 in tall with the stock mach amps, and around 37 deep. but I don't know how big of a box youll be able to fit through the trunk.
32 wide x 13 tall x 17 deep with 3/4 mdf would be slightly over 3 cubes with the displacement of the sub. thats without displacement of port though also. I'm not positive that would fit but I'm guessing you could shoehorn it in. you can find port and volume calculators online also. this is the one I use most. http://www.the12volt.com/caraudio/boxcalcs.asp
ttocs I know this site isn't really for people designing boxes but I've asked a lot on here also because I couldn't find too many people on stereo forums to ask about what will fit in a mustang. All the people on stereo forums usually are doing something really custom if their working with a mustang so its hard to find out how large of a regular box will fit through the trunk opening.
the measurements for my trunk were (I think) 36 wide at the closest point, 15 in tall with the stock mach amps, and around 37 deep. but I don't know how big of a box youll be able to fit through the trunk.
32 wide x 13 tall x 17 deep with 3/4 mdf would be slightly over 3 cubes with the displacement of the sub. thats without displacement of port though also. I'm not positive that would fit but I'm guessing you could shoehorn it in. you can find port and volume calculators online also. this is the one I use most. http://www.the12volt.com/caraudio/boxcalcs.asp
ttocs I know this site isn't really for people designing boxes but I've asked a lot on here also because I couldn't find too many people on stereo forums to ask about what will fit in a mustang. All the people on stereo forums usually are doing something really custom if their working with a mustang so its hard to find out how large of a regular box will fit through the trunk opening.
Last edited by pk222; 01-26-2009 at 03:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SANDY21
V6 (1994-2004) Mustangs
3
08-17-2015 02:41 PM
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
Milan Dragway
Members Rides and Car Show Section
0
08-12-2015 03:43 PM