Do I need a special harness to install a Pioneer Avic-D3 on my 2012 BASE Mustang?
04-08-2012, 09:30 PM
#1
Do I need a special harness to install a Pioneer Avic-D3 on my 2012 BASE Mustang?
I know for the older Ford models you need a harness and color match the wires, but what about the new 2010+ models? I know you need a specific harness for the vehicles with Shaker system, but my Base is bare bones.
This is what I have.
I don't want to end up going to the stereo shop missing a harness.
This is what I have.
I don't want to end up going to the stereo shop missing a harness.
04-09-2012, 12:04 AM
#2
After a few hours of searching, I found this video from Metra
http://www.youtube.com/watch?v=Zh3gDQZz6aU
They talk about the AXXESS Harness XSVI-5520-NAV which is about $50 on average.
I think I'm just going to bring it into the shop and see what they say.
http://www.youtube.com/watch?v=Zh3gDQZz6aU
They talk about the AXXESS Harness XSVI-5520-NAV which is about $50 on average.
I think I'm just going to bring it into the shop and see what they say.
04-09-2012, 01:24 PM
#3
Went to the shop and they tried to find a harness without all the NAV/SYNC bull****, but couldn't. So we settled for the XSVI-5520 harness and had to order an antennae adapter too. Install will cost $70 and I also ordered a
NEW BOYO VTL422C BAR TYPE LICENSE PLATE BACKUP CAMERA
http://www.ebay.com/itm/390392812712...ht_3370wt_1139
NEW BOYO VTL422C BAR TYPE LICENSE PLATE BACKUP CAMERA
http://www.ebay.com/itm/390392812712...ht_3370wt_1139
Thread
Thread Starter
Forum
Replies
Last Post
