What are you working on?
#7281
And tell him to be sure to buy the pulley install tool also if you don't know someone that has one. Pulley won't come off without it.
And as mentioned, lock the hammers up in the house before you start lol.
Last edited by GT500Steve; 06-15-2014 at 04:45 PM.
#7282
6th Gear Member
Join Date: Aug 2011
Location: Thomasville, NC Where we beat headers into submission!!
Posts: 7,233
Have fun. If he hasn't bought them yet the Dynatechs are a little easier to install. The Kooks fit well in the 1&3/4, but the 1&7/8 have been known to hit the steering arm a little bit. I'd also suggest buying new oem gaskets as well.... Don't use the ones that come with the headers, if they are even supplied at all.
And tell him to be sure to buy the pulley install tool also if you don't know someone that has one. Pulley won't come off without it.
And as mentioned, lock the hammers up in the house before you start lol.
And tell him to be sure to buy the pulley install tool also if you don't know someone that has one. Pulley won't come off without it.
And as mentioned, lock the hammers up in the house before you start lol.
I am going to order the 2.5" pulley / idler / pulley tool kit from VMP through Jason.
http://vmptuning.com/pulley-products/vmp25w90tool/
Hammers will be boxed up and hidden away. LOL
#7287
6th Gear Member
Detailed the bike today:
Clay bar
Poor Boy's SSR 2.5 (Medium abrasive swirl remover)
2 coats Poor Boy's black hole
2 coats Adam's butter wax
2 coats Natty's paste wax
Invisible Glass on all chrome
Clay bar
Poor Boy's SSR 2.5 (Medium abrasive swirl remover)
2 coats Poor Boy's black hole
2 coats Adam's butter wax
2 coats Natty's paste wax
Invisible Glass on all chrome