When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Took my car to Pro Dyno for a 2.4" pulley install on the TVS. Found out my oem mass air setup is completely maxed out, along with the injectors near their max..but I am happy with the power it made. I might take it a little easy on it until I get the JLT127 and larger injectors.
Nice!!!! Unless you just like the carbon fiber of the JLT 127mm, the 123mm flows the same at a little less $$. Might look into the 2013 injectors too, I think they will work in our cars. Of course you can have your stock ones modded to flow 72lb/hr for pretty cheap. It was $249 to get mine done I think. Once you get the fuel in it, it should be a rocket ship!!! Congrats man!!
Nice!!!! Unless you just like the carbon fiber of the JLT 127mm, the 123mm flows the same at a little less $$. Might look into the 2013 injectors too, I think they will work in our cars. Of course you can have your stock ones modded to flow 72lb/hr for pretty cheap. It was $249 to get mine done I think. Once you get the fuel in it, it should be a rocket ship!!! Congrats man!!
Yeah, I sort of like the carbon fiber look under the hood now. My Bob's oil seperator is carbon, along with my intake tube right now. Will probably go back with the 127 to keep that look. And probably will go with the 13' injectors since they are good for 750, which is where I will stop with power until bottom end build.
Originally Posted by clowe1965
Sweet numbers Mike! At first glance I thought Steve had posted those and thought WTF, he gave up nearly 100 hp!
Thanks! Nah, I got a ways to go to catch up with Steve!