Alucard's 2014 3.7L long term build
#1
Alucard's 2014 3.7L long term build
I have a 2014 Oxford White 3.7, I have come up with a project that will keep me busy for a while, and hopefully wont look like every other mustang out there.
Boltons:
FR 3.55 gears
Air Raid Oiled CAI (Installed with MPT 93 race tune)
MAC Ceramic LT Headers(Installed, thanks CLOWE!)
DDS Driveshaft
2012 Gt500 Axlebacks (Thanks to Tribefan/installed)
MAC Prochamber(installed)
Ported upper and lower intake manifolds(bought, waiting to send off to port)
Flowmaster Mini cats( they failed after only 150 miles, switched back to Kooks 3" cats)
Dynomax Race Bullets (Installed)
JLT Catchcan
Appearance:
Black Billett Fuel door
Roush Upper Grille(Installed)
Roush Lower Grille(Installed)
Boss 302 Front Splitter
Boss/GT-CS Rear Valance(bought awaiting install)
Cervini Stalker Hood(installed)
CS Spoiler (Installed)
Black Roof Wrap(bought awaiting install)
Handling
Strut Tower Brace from LMR (Installed)
BMR rear suspension from Hypermotive
BMR LCA's
BMR LCA relocation bracket
BMR Panhard Bar
BMR UCA's
BMR relocation mount for UCA
Eibach Pro kit Lowering Springs
Ground Control Caster Camber Plates
Koni Oranges
My Mustang
Trident Motorsports Exhaust clip with lt headers, and xpipe
Mustang Drive by run
First Dyno Run Dynoed at ProDyno in FortMill,SC 269 RWHP 263 Torque 2014 v6 automatic, Airraid CAI,and 93R Bama tune.
A Day at the car wash
White Mustang Registry Number
New Cervini Stalker Hood
I will continue to add pictures to this thread as I take them.
And if someone could make me a sig of my mustang, I would greatly appreciate it.
Boltons:
FR 3.55 gears
Air Raid Oiled CAI (Installed with MPT 93 race tune)
MAC Ceramic LT Headers(Installed, thanks CLOWE!)
DDS Driveshaft
2012 Gt500 Axlebacks (Thanks to Tribefan/installed)
MAC Prochamber(installed)
Ported upper and lower intake manifolds(bought, waiting to send off to port)
Flowmaster Mini cats( they failed after only 150 miles, switched back to Kooks 3" cats)
Dynomax Race Bullets (Installed)
JLT Catchcan
Appearance:
Black Billett Fuel door
Roush Upper Grille(Installed)
Roush Lower Grille(Installed)
Boss 302 Front Splitter
Boss/GT-CS Rear Valance(bought awaiting install)
Cervini Stalker Hood(installed)
CS Spoiler (Installed)
Black Roof Wrap(bought awaiting install)
Handling
Strut Tower Brace from LMR (Installed)
BMR rear suspension from Hypermotive
BMR LCA's
BMR LCA relocation bracket
BMR Panhard Bar
BMR UCA's
BMR relocation mount for UCA
Eibach Pro kit Lowering Springs
Ground Control Caster Camber Plates
Koni Oranges
My Mustang
Trident Motorsports Exhaust clip with lt headers, and xpipe
Mustang Drive by run
First Dyno Run Dynoed at ProDyno in FortMill,SC 269 RWHP 263 Torque 2014 v6 automatic, Airraid CAI,and 93R Bama tune.
A Day at the car wash
White Mustang Registry Number
New Cervini Stalker Hood
I will continue to add pictures to this thread as I take them.
And if someone could make me a sig of my mustang, I would greatly appreciate it.
Last edited by alucard3600; 02-06-2018 at 08:56 AM.
#3
Thanks, Im at a cross roads though, Im thinking of either doing a hood with white on the sides and the middle of it black with a big stripe down the center to the rear OR going carbon fiber (prob wrap or paint for the hood), Roof carbon overlay, trunk, and the trucarbon wing and mirror covers. Do you think the carbon would be a little much or would it look bad ***? Im having a hard time picturing what it would look like and i cant find any pics of a mustang like that, that is white.
#6
Well I found a pic of what it would possibly look like more or less, but I dont know how to edit my post on here so sorry for the double post......
Is that a little much, or do you think it works alright, Im still undecided.
Is that a little much, or do you think it works alright, Im still undecided.
Last edited by clowe1965; 11-22-2014 at 05:18 PM. Reason: picture
#8
Well I found a pic of what it would possibly look like more or less, but I dont know how to edit my post on here so sorry for the double post...... CarbonFiber
Is that a little much, or do you think it works alright, Im still undecided.
Is that a little much, or do you think it works alright, Im still undecided.