CJ Pony PartsWe carry Ford Mustang parts for every Mustang built from 1964 to present. CJ's has everything you need to restore your Mustang or make it the performance & aftermarket styling machine you always dreamed of!
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Mustang Rear Control Arm Kit Installation Video 1979-1998
This Stainless Steel Tubular Rear Control Arm Kit is for all 1979-1998 Mustangs and will replace the factory stamped steel arms, which tend to flex and deflect during spirited driving. This kit includes polyurethane bushings for improved performance and is made from T-304 Stainless Steel, which is then polished.
Begin installation by removing the wheels and rear shocks. Then, remove the bolts holding the sway bar to the control arm and lower the rear to lessen tension on the control arm and take out the springs. Remove the lower control arm and install the new one, and then move on to the upper control arm.
Complete this process on both sides, following Bill's instructions, and then reinstall the springs and rear sway bar. The last step is to grease the bushings, and your installation is complete in 2-3 hours.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor