Steve@CJPP

3648XC Mustang Dynacorn Front Floor Cross Brace and Seat Platform 1983-1993 | CJ Pony Parts

In this video we are showing you how to install Dynacorn's front floor cross brace and seat platform fitting all 1983-1993 Mustangs, using our 1991 Mustang Notchback. The front floor cross brace goes across the front floor pan from rocker to rocker and over the transmission tunnel.The bucket seats bolt to this part and this piece is often damaged resulting in a major safety hazard.

To replace the cross brace requires welding, so this would not be for the amateur installer. This installation will be time consuming since you have to remove most of your Mustang's interior, but do take your time and make sure everything is done correctly.

Replacing the cross brace is the best option if your factory seat platform is damaged.

For more Dynacorn parts available at CJ Pony Parts check out:
Dynacorn | CJ Pony Parts

For more Mustang floor pans available at CJ Pony Parts check out:
Mustang Floor Pans | CJ Pony Parts