Auto choke exhaust feed tube
#1
Auto choke exhaust feed tube
Warning amateur!
I'm working on a '66 289 engine. The tube that goes from the carb to the exhaust manifold (auto choke function, I assume) is broken at the exhaust manifold. There's only the hole left in the manifold (see photo and please pay no attention to the epoxy goop around the tube). I can't tap the manifold casting obviously. And I've been to every auto parts store in town for the fitting that, I'm guessing, press fits into the manifold with no luck. Is there a trick I can perform or is there a source for the missing part?
Thx
I'm working on a '66 289 engine. The tube that goes from the carb to the exhaust manifold (auto choke function, I assume) is broken at the exhaust manifold. There's only the hole left in the manifold (see photo and please pay no attention to the epoxy goop around the tube). I can't tap the manifold casting obviously. And I've been to every auto parts store in town for the fitting that, I'm guessing, press fits into the manifold with no luck. Is there a trick I can perform or is there a source for the missing part?
Thx
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM