Seadog

I have a 65 (64 1/2) with a 260 V8. Does anyone know where I can find some pictures or info on how to route and attach some of the wiring harnesses under the hood? Specifically, the harness that goes to the starter solenoid and the oil and temp sending units. Also, the ground wire from engine to firewall.

I have a wiring diagram book and it shows generally how and where to route the ignition harness but doesn't get specific on certain attachments.

Thanks.

Stepman

Sounds like what you need is an assembly manual. It will show routing, retainers,and every detail that you need.

bop11

I have seen those books at the Mustang Barn, in Souderton PA. They should be on the WEB.

tx65coupe

I got this from CJ's

http://www.cjponyparts.com/wiring-an...-1973/p/CDW-V/

PaulLeonse

Sounds really good It will show routing, retainers,and every detail that you need.I have some pics i will share these here.

Seadog

Thanks for the comments and help. I finally found another publication that helped me nail down the proper routing.

In addition to routing I've had some fun rewiring everything under the hood and the harness to the trunk for tail lights and fuel sending unit. I've really enjoyed the work. Also removed the driver's seat and the instrument cluster so I could get to everything under the dash. Someone in the past committed a bunch of crimes under the dash! But I have everything back to stock now, including removal of some wiring that went directly to the fuse box to make this wiring hot, but not fused! The fuse box was just dangling by the wires and that's back in place too. For the first time I now have parking lights, instrument cluster lights, courtesy and glove box lights!