window questions
#1
window questions
Took the window, regulator, scissor assy. vent window assy. etc. all out down to bare door shell. Can't remember what order they go back in. Installed new regulator and scissor. what goes in next the vent assy? should I put the new weather strip/felts for the window in before or after the door glass.
I was wondering if someone knew of a logical order or sequence to save me time and creative language. First time on this forum, Car has been sitting more than 3/4 finish on rebuild, trying to get going again. Thanks
I was wondering if someone knew of a logical order or sequence to save me time and creative language. First time on this forum, Car has been sitting more than 3/4 finish on rebuild, trying to get going again. Thanks
#3
Put the window felts on before you put the glass in.
then glass and then vent window.
You'll need the room to get the glass in without having the vent window channel in the way.
You can then sneak the vent window in place. You may have to turn the vent window assembly sideways to get it started, but then turn it again while angled to get it on the edge of the glass and slip it down in place.
then glass and then vent window.
You'll need the room to get the glass in without having the vent window channel in the way.
You can then sneak the vent window in place. You may have to turn the vent window assembly sideways to get it started, but then turn it again while angled to get it on the edge of the glass and slip it down in place.
Thread
Thread Starter
Forum
Replies
Last Post
Dan Moldovan
4.0L V6 Technical Discussions
3
04-06-2016 09:40 AM