Mustang & Fords Magazine (Nov Issue)
#1
Mustang & Fords Magazine (Nov Issue)
Being that there are a few of us on the forum that are Inline 6 fans, check out the article on pages 64 through 68 in the just released November issue. "Lil Stinger" is a built up 200 CID with the Austrailian intake and head. He turning a little over 200 hp according to the article.
#3
RE: Mustang & Fords Magazine (Nov Issue)
Here the basics on the engine in addition to torque.
264/264 duration, 110 degree, .
450/.450. lift Cl;ay Smith/FSP Cam
1.5:1 Ford rockers
9.9: Compression
235 hp at flywheel
228 lb-ft Torque
Holley 500 cfm 2 bbl
6 into 2 headers
C-4
8 in rear with 3.00 gears
264/264 duration, 110 degree, .
450/.450. lift Cl;ay Smith/FSP Cam
1.5:1 Ford rockers
9.9: Compression
235 hp at flywheel
228 lb-ft Torque
Holley 500 cfm 2 bbl
6 into 2 headers
C-4
8 in rear with 3.00 gears
Thread
Thread Starter
Forum
Replies
Last Post
NorthAmericanTuning
S550 2015-2023 Mustang
3
03-18-2016 11:21 AM