Best way to hook up Electric Choke
#1
Best way to hook up Electric Choke
What is the best way to hook up an electric choke? I did a search but didn't find anything that useful. I just know that I need to put it on a 12V source that only has current when the car is actually running. Where is the best place to do this?
I was thinking the coil, but then I read that is only roughly 9V when running. What are other options that are effective and look aesthetically pleasing?
Here's info on my setup - 351w, p/s, no AC, Edelbrok 650cfm carb. What are my options for the choke setup? We are almost to the point to start the car, just a few more things to check off the list.
I was thinking the coil, but then I read that is only roughly 9V when running. What are other options that are effective and look aesthetically pleasing?
Here's info on my setup - 351w, p/s, no AC, Edelbrok 650cfm carb. What are my options for the choke setup? We are almost to the point to start the car, just a few more things to check off the list.
#6
RE: Best way to hook up Electric Choke
Thanks guys.
Where should I hook the heater blower motor up to? We know where the ground goes but not sure on the power...when we got the car it was disconnected with the wire cut off.
Where should I hook the heater blower motor up to? We know where the ground goes but not sure on the power...when we got the car it was disconnected with the wire cut off.
Thread
Thread Starter
Forum
Replies
Last Post
mrappe
V6 (1994-2004) Mustangs
0
09-26-2015 10:16 AM