Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

dash pad removal..

Thread Tools
 
Search this Thread
 
Old 11-22-2006, 02:20 AM
  #1  
ADRIAN1
2nd Gear Member
Thread Starter
 
ADRIAN1's Avatar
 
Join Date: Jan 2006
Location:
Posts: 439
Default dash pad removal..

i just orderd a new dash pad from mustang plus so i should be getting it in two days. how hard is it to remove the dash pad?? are there any hidden screws?
ADRIAN1 is offline  
Old 11-22-2006, 02:33 AM
  #2  
tdlabru
1st Gear Member
 
tdlabru's Avatar
 
Join Date: Nov 2006
Location:
Posts: 71
Default RE: dash pad removal..

The dash pad removal was pretty easy on my '68. It may not be exactly the same, but the only "hidden" items were two nuts on the small section that goes down by the heater controls on the driver's side and to the right of the glove box on the passenger side. As a note, the easiest way to pull them off since they tend to stick is using the opening for the windshield defrost. Good luck!
tdlabru is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lincolnshibuya
V6 (1994-2004) Mustangs
1
10-06-2015 08:45 AM
Urambo Tauro
5.0L (1979-1995) Mustang
6
10-05-2015 09:37 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
mungodrums
S550 2015-2023 Mustang
6
09-28-2015 05:45 AM
jc409
Convertible Tech
0
09-26-2015 08:28 AM



Quick Reply: dash pad removal..



All times are GMT -5. The time now is 01:51 AM.