john721

I need a "visual aid"! Finally getting around to the clutch... I need help figuring out what springs I need...I have to one reall heavy spring inside the car on the clutch pedal...but aren't there more? Outside? Underneath? Any help would be greatly appreciated!

HGC

It's a 65, right? That's what this is for. It's from the original shop manual. Do you need the pages with the assembly/dissassembly instructions?

[IMG]local://upfiles/82474/3055BFE9A9994E7BB56A17CE100BA68B.jpg[/IMG]

john721

YES!! it is a 65...Please send the additional pics... I'm warming up my printer!

HGC

Give me about 15 minutes and you'll have it all.

HGC

It's going to take two posts due to the size of the scan. I tried to make them large enought to read. They should still print on a regular sheet of paper. Let me know if you need higher resolution images. I could probably email them to you since they would be too large to post. The manual is for Comet, Falcon, Fairlaine and Mustang so be careful in the specification pages to pay attention to the car.

[IMG]local://upfiles/82474/9E3C1DCD1E2842E9892229C24B784738.jpg[/IMG]

[IMG]local://upfiles/82474/77F143359E124A198F71013FE4B32818.jpg[/IMG]

HGC

Specifications for torque, lube etc.

[IMG]local://upfiles/82474/68ECCA424A1A40898A4C2C5E3624333C.jpg[/IMG]

[IMG]local://upfiles/82474/B031243AC5604F6E80716AB2373FD6A9.jpg[/IMG]