Torque on Shelby fiberglass hood bolts?
#1
5th Gear Member
Thread Starter
Join Date: Aug 2007
Location: Delaware(US) & Nova Scotia(Canada)
Posts: 2,035
Torque on Shelby fiberglass hood bolts?
Anyone know how much torque I should use on the hood bolts with a 68 Shelby fiberglass hood? Got the hood on today and rough fitted for transport. While tightening the bolts just snug I here the fiberglass just start to make a cracking sound so didn't want to tighten them too much without asking.
Thanks
Thanks
#2
RE: Torque on Shelby fiberglass hood bolts?
Their is probably a aluminum threaded plate that is under the fiberglass (or steel), either will be thin so I would go only wrist tight. Check them often or use some loctite.
#3
5th Gear Member
Thread Starter
Join Date: Aug 2007
Location: Delaware(US) & Nova Scotia(Canada)
Posts: 2,035
RE: Torque on Shelby fiberglass hood bolts?
Yeah its steel from what I can see. Pretty much what I figured.. wrist tight with an extra 1/8th turn. Thanks for suggesting loctite as I hadn't thought of that.
Thanks!
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
maestro1024
Classic Mustangs (Tech)
6
09-21-2015 02:40 PM
MustangForums Editor
Other Professional Racing
1
09-10-2015 11:41 AM