My 347 is almost done--PIC
#21
RE: My 347 is almost done--PIC
Looks great. What heads and cam are you using? I'm also interested in doing a 331 or 347 for my 66 Coupe and was considering the Trick Flow twisted wedge butFRPP has some new style GT40s that look pretty good.
#22
RE: My 347 is almost done--PIC
Thanks!
My heads are TFS street: http://store.summitracing.com/partdetail.asp?autofilter=1∂=TFS%2D51400004& N=
700+400098+4294908331+115&autoview=sku
If I were to buy new heads today I would seriously look at the Edelbrock Pro Port CNC heads. I may even swap out for them next year.
I would also use a Dart or Boss block.
Good luck with your build.
[align=left] [/align]
My heads are TFS street: http://store.summitracing.com/partdetail.asp?autofilter=1∂=TFS%2D51400004& N=
700+400098+4294908331+115&autoview=sku
If I were to buy new heads today I would seriously look at the Edelbrock Pro Port CNC heads. I may even swap out for them next year.
I would also use a Dart or Boss block.
Good luck with your build.
[align=left] [/align]
#24
RE: My 347 is almost done--PIC
I never gave it a thought. I hope she is bad to the bone. I doubt though that the weiand, my 750, and the cobra air cleaner will fit. I am looking at the TCP motor mounts that allow you to drop the engine an inch. Not sure if that will help either. Right now I have a 3" cowl and may need more
[align=left] [/align]
[align=left] [/align]
Thread
Thread Starter
Forum
Replies
Last Post
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM