help:fuelpump issues
#12
RE: help:fuelpump issues
well with some quick research, i found a little tag on the fuel pump. 12833.. i looked it up on keystone and it turned out to be a part number for a holley fuel pump.. but no info, so i went on the holley website and looked up the part number i learned its a 80gph pump at 7.5psi of pressure
should i go ahead and get the same pump, or would you guys recomend me to go bigger?
should i go ahead and get the same pump, or would you guys recomend me to go bigger?
#13
RE: help:fuelpump issues
80 gph would probably work okay for you but 7.5 PSI will probably unseat inlet needles and thus rapidly flood the engine. You would have to run a regulator at 7.5psi which cost more and tend to fail from what I have seen.
-Gun
-Gun
Thread
Thread Starter
Forum
Replies
Last Post
lincolnshibuya
V6 (1994-2004) Mustangs
9
12-08-2015 04:37 PM