Martz rear chasis install
03-22-2010, 09:09 AM
#31
Join Date: Mar 2010
Location: Ca
Posts: 5
Alright I figured it out. Now correct me if I'm wrong but I zero'd the crossmembers to 0 degrees to square it up to the car.
03-24-2010, 11:32 AM
#32
Join Date: Nov 2008
Location: oklahoma
Posts: 11
you lost me.. you zerod them? What I did was square the front crossmember to the car, I measured to a set line in the rear, I choose the rear by where the axle will sit, that was the true measurement I wanted. That way I know the rear axle will be square to the front crossmember, measuring from a set place on either side of the car where the axle will set makes sure the axle will be square with the car. Now the rear axle should then be square with the car and have the same triangulation with the links (same length of the links on either side of the axle).
03-14-2013, 02:38 PM
#33
Join Date: Mar 2010
Location: tn
Posts: 15
Subbing. Having issues seeing pics and thinking about ordering this kit.
03-15-2013, 10:24 AM
#34
Yukon Cornelius
Join Date: Oct 2005
Location: deep in the heart of dixie GEORGIA
Posts: 11,808
this thread is 4 year old..i doubt there is gonna be any updates to it
Thread
Thread Starter
Forum
Replies
Last Post
NorthAmericanTuning
Vendor For Sale / Group Buy Classifieds
5
11-09-2016 11:45 AM
NorthAmericanTuning
S550 2015-2023 Mustang
3
03-18-2016 11:21 AM
