Martz rear chasis install
#1
Martz rear chasis install
Installastion took about 2 days. Mostly because the direction might as well been blank. Had to measure and figure a lot out on our own. Cross members were not a perfect fit either. Had to weld some metal plates up as spacers to get the cross members to be a snug fit. We pretty much then fabbed up the whole assembly with the leaf springs still on so we could get good measurements for the existing pinion angle and such. Exhaust had to be cut off as well. that really pissed me off becuse i loved the look and sound of my exhaust and now will have to change it up.
#2
Here are some pics fully installed. Ill get more tomarrow when its up on the lift getting exhaust installed.
#3
#4
i called back twice but i decided to do the install myself. My brother in-law is a good welder. Its a bitchin setup...leaves a lot of room for mini tubbin
Last edited by eZ; 10-20-2008 at 09:54 PM.