1965 carb rebuild
#1
1965 carb rebuild
any ideas what carb i have and where i can find a rebuild kit from for my car
this is printed on the carb -
FOMOCO C 50F F
B 5 DA
The internal diameter of the gasket is approx 36 millimeters.
this is printed on the carb -
FOMOCO C 50F F
B 5 DA
The internal diameter of the gasket is approx 36 millimeters.
#3
Are auto parts stores with American car parts common in France?
Try the mustang parts places I gave you the names of in your other thread, Im sure they will have what you need.
I remember that you have 6 cyl Mustangs, they had a couple different carbs. www.fordsix.com will have lots of info for you too.
Try the mustang parts places I gave you the names of in your other thread, Im sure they will have what you need.
I remember that you have 6 cyl Mustangs, they had a couple different carbs. www.fordsix.com will have lots of info for you too.
#4
#6
idk if they have autozones in france lol..i got a '66 rebuild kit for my i6 autolite 1100 (which is most likely the same as urs, fomoco 1100 lol) it was like $15 and i got mine at autozone, lots of places sell them, i believe national parts depot sells them..like they ^ said ponycarbs might be helpful too.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
1100, 1965, 65, carb, carburator, carburetor, caruretor, fomoco, kit, mustang, rebuild, rebuildd, rebuilding, straight, v6