lunarweasel

Thanks!

Are there front end rebuild kits that have it included? I know CJ, for instance, has stock rebuilds.

67 evil eleanor

Other than buying a drill bit, thats about it. If you can borrow one, then the only cost is time and maybe some hide. A realignment may be in order.

racin66coupe

is there a way to do it without the template? i dont really wanna spend the 100 for a template im going to use once :/

1slow67

You can get the paper template. Just make sure it is to size.

zmetalmilitia

There's a template available for free here at our site. Look under FAQ's.

jonward786

there is nothing unaffordable about the shelby drop

Joe67

daze has them for 11, and the specialty drill bit for 10, plus 4 shipping, so 25 bucks and you ahve a accurate durable, and resellable template that you can sell to me =D

racin66coupe

where in the heck did i think they were like 100?? weird.. thanks joe

zmetalmilitia

Again, There's a template available for free here at our site (MF). Look under FAQ's.

Starfury

You absolutely need to get the car realigned afterwards. Not maybe, not in a couple months, but immediately afterwards. Your toe and camber will be drastically off, enough to cause tire wear and erratic handling conditions.