should the cam have any fore/aft movement once installed.
#11
On these pics your looking down through the lifter bore at the cam lobe. Note on the top pic you can only see 1/2 of the lobe and for comparison the bottom pic shows the cam lobe lined up with the lifter bore.
Cylinders 1-4 line up nice like the bottom pic. Cylinders 5-8 line up like the top pic and ate my lifters.
Cylinders 1-4 line up nice like the bottom pic. Cylinders 5-8 line up like the top pic and ate my lifters.
Last edited by Red Coupe; 04-21-2009 at 02:23 PM.
#13
All of the lobes on the 5-8 look like the bottom. All of the lobes on 1-4 look like the top. I did confirm the grind number before installation. However, It was last spring when I put it in. It has just taken me this long to put a few thousand miles on the car.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM