Wheel fitment - 16x8's on a '67
05-30-2009, 01:33 PM
#21
Join Date: Feb 2008
Location: Vero Beach Fl
Posts: 37
I run 16 X 8 TTD all the way around on my 67 with a 4.5 backspace with 225 /55/ 16. No rubbing at all but I did roll the front fender lip to be safe.with the 620 spring and 1 inch drop.
Hope that helps
Hope that helps
Last edited by Haywired; 05-30-2009 at 01:36 PM.
05-30-2009, 05:16 PM
#22
5th Gear Member
Join Date: Aug 2007
Location: Delaware(US) & Nova Scotia(Canada)
Posts: 2,035
I remember reading that info on the Dodgestang wheel chart. That and the info I got from VWW made me feel a bit better.
With stock rear height and the coil-overs up front I "hope" the 16x8 245/50s fit. My issue is I haven't rolled the wheelwell lips and don't want to. The chrome moldings don't look to be friendly with the rolled lips.
With stock rear height and the coil-overs up front I "hope" the 16x8 245/50s fit. My issue is I haven't rolled the wheelwell lips and don't want to. The chrome moldings don't look to be friendly with the rolled lips.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
