guybored

Doing the efi swap, haven't had time to mess with it until last week. I soldered the wire they way they go. On Sunday my dad came over to help me with it, we got it to crank and turn over but it wouldn't turn on. We checked the spark GREAT spark, my dad even got some. Then we checked the gas, I had the feed and return lines crossed. After fixing that we got them right then tried to start it again. It was turning over but wouldn't budge. So we checked the gas making sure it was right, then the spark. Nothing, now we had fuel but no spark. Went to check the coil, module and bought them new with a rotor(supposedly they were good but bought them any way). We installed it continued to turn over but no spark. Got late picked everything up. Today I go back and it won't even do anything. Turn the key and nothing. Battery is charged, any body have an idea of what it could be. I am going to go check the fusible links to make sure they are good.

guybored

After tracing and making sure everything was connected. We tried it again, guess what now it has spark but it won't turn on. Anybody have an idea of how to check if the injectors are getting fuel. I am going to google it to see if anything comes up.