Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

Scott Drake emblems quality

Thread Tools
 
Search this Thread
 
Old 01-29-2010, 11:34 AM
  #1  
TheMarco
2nd Gear Member
Thread Starter
 
TheMarco's Avatar
 
Join Date: Dec 2009
Location: California
Posts: 155
Default Scott Drake emblems quality

Hi guys,

About 2 months ago I put brand new '289' pony emblems on my fenders. Already the black on the '289' is peeling off. Is this normal or did I just have bad luck and get a bad emblem?

The paint coming off after just 2 months seems rather crappy to me...
TheMarco is offline  
Old 01-29-2010, 12:10 PM
  #2  
bredn65
 
bredn65's Avatar
 
Join Date: Oct 2009
Location: Surf City, Ca
Posts: 35
Default

I used them and no problem(s) to report here.
bredn65 is offline  
Old 01-29-2010, 01:05 PM
  #3  
blue66mustang
2nd Gear Member
 
blue66mustang's Avatar
 
Join Date: May 2007
Location: Illinois
Posts: 332
Default

I bought a complete set of all the emblems made by Scott Drake from Virginia Classic for my '66. One of the fender Pony's had the red stripe stick to the packaging. They stood behind them and sent me a new one free of charge. I belive Scott Drake has a 100% guarentee, Contact them.
blue66mustang is offline  
Old 01-29-2010, 05:21 PM
  #4  
4reboy
5th Gear Member
 
4reboy's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 2,990
Default

my sail panel emblems and hood scoop emblems are both scott drake I think and they are great quality. Contract Scott Drake if it's a problem, 2 months sounds way too soon for wear and tear on an emblem.

The only ones I complain about are my MUSTANG emblems for the trunk lid, the S and N didn't fit in pre-existing holes so I had to clip off the pins and put them on with 3M tape. Also some of the other letters were just difficult to get on
4reboy is offline  
Old 01-29-2010, 05:35 PM
  #5  
jonward786
3rd Gear Member
 
jonward786's Avatar
 
Join Date: May 2008
Location: San Francisco, CA
Posts: 678
Default

yep, the scott drake emblems suck big time. all the black paint is gone from the 289 lettering on both of mine. also, they dont come pre-contoured to lay flush on the fender, so you have to bend them yourself. sh!tty quality
jonward786 is offline  
Old 01-30-2010, 01:03 AM
  #6  
TheMarco
2nd Gear Member
Thread Starter
 
TheMarco's Avatar
 
Join Date: Dec 2009
Location: California
Posts: 155
Default

Originally Posted by jonward786
yep, the scott drake emblems suck big time. all the black paint is gone from the 289 lettering on both of mine. also, they dont come pre-contoured to lay flush on the fender, so you have to bend them yourself. sh!tty quality
Yep a definite +1 on that from me too. I had to bend them myself too. They come 100% straight while the fender obviously isn't.

I then attached them with 3M tape too rather than with the pins for a more snug/tight fit. It took me quite a while to get it right (looks really good besides the faded paint on them) so it annoys me quite a bit I'm gonna have to do it again.

Oh well....
TheMarco is offline  
Old 01-30-2010, 04:54 AM
  #7  
tx65coupe
5th Gear Member
 
tx65coupe's Avatar
 
Join Date: Dec 2008
Location: Texas
Posts: 4,462
Default

I have some scott drake parts on my car and most are great. I will say that my fender emblems with the pony and the red white a blue stripes have an issue. The paint is already starting to come off of them. They are about a year old, but started doing this about 6 months ago. Does anyone know what color model paint or similar I can buy that will match?
tx65coupe is offline  
Old 01-30-2010, 08:42 AM
  #8  
tcrote5516
2nd Gear Member
 
tcrote5516's Avatar
 
Join Date: Aug 2009
Location: NH
Posts: 476
Default

I must say I'm not impressed either. The red and blue stripes faded on mine in 6 months. 95% of that time the car was in the garage!
tcrote5516 is offline  
Old 01-30-2010, 10:14 AM
  #9  
noroof66
3rd Gear Member
 
noroof66's Avatar
 
Join Date: Sep 2006
Location: CA
Posts: 629
Default

Originally Posted by tx65coupe
I have some scott drake parts on my car and most are great. I will say that my fender emblems with the pony and the red white a blue stripes have an issue. The paint is already starting to come off of them. They are about a year old, but started doing this about 6 months ago. Does anyone know what color model paint or similar I can buy that will match?
I have the original ones that became faded so I just used the Testors model paint red (1103), white (1145), and blue (1110). Seemed to match well, but I thought they looked awesome when I was done. But then again fresh paint usually does that.
noroof66 is offline  
Old 01-31-2010, 09:46 PM
  #10  
tx65coupe
5th Gear Member
 
tx65coupe's Avatar
 
Join Date: Dec 2008
Location: Texas
Posts: 4,462
Default

Originally Posted by noroof66
I have the original ones that became faded so I just used the Testors model paint red (1103), white (1145), and blue (1110). Seemed to match well, but I thought they looked awesome when I was done. But then again fresh paint usually does that.
Thanks for the tip. I'll repaint mine soon, maybe this week.
tx65coupe is offline  


Quick Reply: Scott Drake emblems quality



All times are GMT -5. The time now is 08:59 AM.