Master cylinder issue
#1
Master cylinder issue
So I got my 94 cobra master cylinder to complete my Cobra brake 4 wheel disk install. However, its just a little too long with my booster. Any thoughts/ I am thinking about trimming the bolts studs down so i can get it on.
#2
Would it work to sort of shoehorn it in by assembling the booster and m/c first, then drop into place and run the bolts for the booster through the firewall? Not sure of your exact setup with the booster.
Thread
Thread Starter
Forum
Replies
Last Post
AmericanMuscle4.6GT
2005-2014 Mustangs
7
11-10-2015 02:06 PM