pony carbs video
pony carbs video
02-20-2010, 09:15 PM
#2
1st Gear Member
Join Date: Aug 2009
Location: ga
Posts: 116
02-21-2010, 06:03 AM
#3
5th Gear Member
Join Date: Dec 2008
Location: Texas
Posts: 4,462
I know a few people that have used Pony Carbs and they like them. I also hear nothing but good things about them from several people at local cruise nights. I wonder if the problems with them are a recent issue.
We had issues with the autolite 1 bbl carb on the 65 back when it was still a 200 I6 and rebuilding the carb or trading it for a rebuilt carb from the local parts store would not make it run even close to good. I ended up getting a basically new one from a place in Woodstock NY I believe, but I can't remember the name of the place. The carb we got was very nice and the car ran nearly perfect after that.
We had issues with the autolite 1 bbl carb on the 65 back when it was still a 200 I6 and rebuilding the carb or trading it for a rebuilt carb from the local parts store would not make it run even close to good. I ended up getting a basically new one from a place in Woodstock NY I believe, but I can't remember the name of the place. The carb we got was very nice and the car ran nearly perfect after that.
Last edited by tx65coupe; 02-21-2010 at 06:12 AM.
02-21-2010, 08:48 AM
#4
2nd Gear Member
Join Date: Sep 2008
Location: Virginia
Posts: 367
I had my autolite 1100 rebuilt by pony carbs, and it runs great. I went with the concours quality and it is beautiful. (probably the best looking thing on my car right now!) I have the install video on disc, but I'm not sure if I can copy it. Try calling them again, they will probably send you one.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
