Advice needed on 67 Mustang
#43
The first two pictures have relatively short links, but the others have MUCH longer links. You might've copy and pasted the wrong link on accident.
#44
OK Figured it out....
1
2
3 - Is this a kick panel?
4 - Same as 3 (other side)
5 - Any idea which wire harness this is, #6 is a specific connection on it
6
7 - This looks like an power window unit. Am I right?
8
9 - Is this a drum brake?
10
11
12
I don't know any of these parts, if anyone can help me, I would appreciate it.
1
2
3 - Is this a kick panel?
4 - Same as 3 (other side)
5 - Any idea which wire harness this is, #6 is a specific connection on it
6
7 - This looks like an power window unit. Am I right?
8
9 - Is this a drum brake?
10
11
12
I don't know any of these parts, if anyone can help me, I would appreciate it.
Last edited by Novice-Owner-Marc; 09-26-2010 at 05:51 PM.
#45
That's really weird, cause on the other pics the first two worked but the rest since then didn't work.
Try photobucket or another online picture uploading site. Maybe you'll have better success.
#47
Now I can see them.
OK Figured it out....
1
2
3 - QUARTER TRIM PANEL (go on each side of the rear seat)
4 - Same as 3 (other side)
5 - Any idea which wire harness this is, #6 is a specific connection on it
6
7 - WINDSHIELD WIPER TRANSMISSION
8
9 - Is this a drum brake? YES BRAKE DRUM
10 SPEEDOMETER CABLE AND SPEEDO GEAR
11
12
BRAKE MASTER CYLINDER AND POWER BRAKE BOOSTER.
I don't know any of these parts, if anyone can help me, I would appreciate it.
1
2
3 - QUARTER TRIM PANEL (go on each side of the rear seat)
4 - Same as 3 (other side)
5 - Any idea which wire harness this is, #6 is a specific connection on it
6
7 - WINDSHIELD WIPER TRANSMISSION
8
9 - Is this a drum brake? YES BRAKE DRUM
10 SPEEDOMETER CABLE AND SPEEDO GEAR
11
12
BRAKE MASTER CYLINDER AND POWER BRAKE BOOSTER.
I don't know any of these parts, if anyone can help me, I would appreciate it.
Last edited by tx65coupe; 09-27-2010 at 02:56 AM.
#48
tx65 nailed it, glad to see you got the pics working.
I have no idea what #2 is.
And that harness has to be either the taillight harness or part of the gauge cluster. I'm betting it's the taillight harness cause mine had the same wrapping around the wires.
I have no idea what #2 is.
And that harness has to be either the taillight harness or part of the gauge cluster. I'm betting it's the taillight harness cause mine had the same wrapping around the wires.
#49
#1 is a headlight wiring connector, #2 is a left-rear splash shield for the LH front wheel. And a really crappy job of installing the seal, too. They are supposed to be stapled, not screwed, and attached better than that. IMHO buying them separately is a waste, I always use the ones that come with the rubber seals already attached.
Notice the bits of glue on #3 & #4. There is supposed to be a thick layer of jute glued on there, this is available new, die-cut, and reduces noise inside the car. If you are an adult, you'll want to put this back on when you refinish the panels.
#5 is probably an instrument connector, but I'd need to see the end, in focus, not the side.
Notice the bits of glue on #3 & #4. There is supposed to be a thick layer of jute glued on there, this is available new, die-cut, and reduces noise inside the car. If you are an adult, you'll want to put this back on when you refinish the panels.
#5 is probably an instrument connector, but I'd need to see the end, in focus, not the side.
#50
Secondly, #6 is one of the connectors on the wiring harness. I will get another picture up of all the connections if that will help.
Thanks again everyone. You all ROCK!!