GT140T hits the magazine in February's issue of Modified Mustangs and Fords
#1
GT140T hits the magazine in February's issue of Modified Mustangs and Fords
Well we got bumped from the November issue, but they said it would be in the February issue. So keep your eyes open for the February issue of Modified Mustangs and Fords magazine. If you do not know the car I am talking about Go to Youtube and enter GT140T to see the car that is if you have not already been following the build of it over the years.
#4
With a bad converter we had 260 rwhp at 15lbs boost and 300 rwhp at 24lbs of boost. I think the converter was ok at 15lbs of boost, it was the 24lbs of boost that did it in. Have not dyno'd it again since we put a better conveter in. The color is 08 Jeep Rescue Green over dark sealer.
#5
ill be trying to remember to look at this in the mag...just make sure to bump this when it gets close
i had a SVO i really miss that car i want another one day but id really like to build a SN95 new edge with the SVO drivetrain with a viper spec 6 speed and some 4.56 gears out back
i had a SVO i really miss that car i want another one day but id really like to build a SN95 new edge with the SVO drivetrain with a viper spec 6 speed and some 4.56 gears out back
#7
first of all Dr. Paul didnt write those letters...
http://www.youtube.com/watch?v=5CoQW...eature=related
Last edited by rmodel65; 11-27-2011 at 12:43 PM.
#10
Talked to the editor the other day and he said
I’ve been holding onto the feature to put in a special turbo-themed issue. I’ve had a hard time lining up my freelance photographer and my cover car, but I think that is going to happen right after Christmas. We’ll be calling you when it goes in to get some quotes and go over the tech sheet. At that point, we can tell you exactly what issue and when it goes on sale.
So now we wait and see?
I’ve been holding onto the feature to put in a special turbo-themed issue. I’ve had a hard time lining up my freelance photographer and my cover car, but I think that is going to happen right after Christmas. We’ll be calling you when it goes in to get some quotes and go over the tech sheet. At that point, we can tell you exactly what issue and when it goes on sale.
So now we wait and see?