outer tie rod for my drum /disk conversion HELP
#1
outer tie rod for my drum /disk conversion HELP
heres what i purchased for my 69
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4559801734
of off a 75 maverick i was told...
now i purchased the outer tie end rods for them but no go..the old outer tie end rods will almost work but a little long //..the nut fits but wont tighten all the way to keep it completely tight..
hers the dimensions of the taperred spindle end...largest part of taper 0.59..smallest part is 0.52..and the lenght or depth is 0.71
the granadfa tie ends are the ones i purchased but there too big
please i need help cause i cant do anything else till this is resolved..ty
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4559801734
of off a 75 maverick i was told...
now i purchased the outer tie end rods for them but no go..the old outer tie end rods will almost work but a little long //..the nut fits but wont tighten all the way to keep it completely tight..
hers the dimensions of the taperred spindle end...largest part of taper 0.59..smallest part is 0.52..and the lenght or depth is 0.71
the granadfa tie ends are the ones i purchased but there too big
please i need help cause i cant do anything else till this is resolved..ty
#2
RE: outer tie rod for my drum /disk conversion HELP
Consider the Baer tracker adjustable tie rod ends. Give Baer a call to make sure they will fit, and that they send you the correct ends. Heck, they are only 28 bux a pair.
http://baer.com/cgi-bin/start.exe/ba...ntry=y&thid=56
http://baer.com/cgi-bin/start.exe/ba...ntry=y&thid=56
Thread
Thread Starter
Forum
Replies
Last Post