200 straight six cable clutch conversion
#1
200 straight six cable clutch conversion
I'm looking at doing a cable clutch conversion on my 66 200 straight six. This means I need to convert my push style clutch fork to a later pull style clutch fork. I've seen where others have done this with small block bell housings (mustang steve), welding in the boss that the fulcrum pivot ball threads into the bellhousing.
Does anyone know if this has been done with the smaller straight six bellhousing?
I dug up a newer style bellhousing and clutch fork and was comparing it to my older bell and fork and it looks like it should be possible, but possibly tricky.
Scott
Does anyone know if this has been done with the smaller straight six bellhousing?
I dug up a newer style bellhousing and clutch fork and was comparing it to my older bell and fork and it looks like it should be possible, but possibly tricky.
Scott
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
nmra1965
Other Professional Racing
0
09-26-2015 10:46 AM
1966, 200, 50, bellhousing, cable, cheap, clutch, conversion, cylinder, ford, mustang, pivot, straight, supercharger, vintage