Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

carb problem

Thread Tools
 
Search this Thread
 
Old 04-03-2012, 07:17 AM
  #1  
gonzalezmax84
Thread Starter
 
gonzalezmax84's Avatar
 
Join Date: Mar 2012
Location: New jersey
Posts: 1
Default carb problem

so I have a 66 mustang coupe its s straight 6 200ci. I just decide to rebuild the carb witch is a single barrel 1100 carb and car was run fine befor rebuild just did it to clean it up. we put it back on now car runs terribly misfire want to stall out if Im not playing with the choke. we took it apart again made sure everything was good and it was and it still wasnt working right we did all the right adjustments. we so looked on line and a after finding that, that ford carb suck just to see if it was the actual carb that wasn't working we put a carb from a 50 Chevy truck exta carb that we had.and it ran great. so it turned out to be that 1100 carb. so basically I wanted to kno what other carb I can use that will go or fit on my car ???
gonzalezmax84 is offline  
Old 04-03-2012, 07:21 AM
  #2  
boeing747arowair
3rd Gear Member
 
boeing747arowair's Avatar
 
Join Date: Nov 2005
Location: Miami, Florida
Posts: 540
Default

I just had my professionaly restored and it runs excellently. then again i was going for an orginal/concours resto
boeing747arowair is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM
Sminemann
Classic Mustangs (Tech)
7
09-17-2015 09:24 AM
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM
tramphardrocker
5.0L (1979-1995) Mustang
6
09-13-2015 08:56 PM



Quick Reply: carb problem



All times are GMT -5. The time now is 08:46 AM.