Alecmgl

Hey guys so I'm hoping someone on here can tell me how to fix this problem I'm having with the blinker switch on my 66 mustang. It goes down just fine for the left blinker to work, but when I try to push it up for the right blinker, it's like it's jammed and I can't push it any farther than where it sits normally when both of the blinkers are off. I hope this is a fairly easy fix. Help anyone??

jlg2002

if nobody's told you yet, your TS cam inside the column is damaged and you just need to replace it.

musnicki

This is my third one in seven years. Hopefully this one, which is from Scott Drake, lasts a little longer. Pull the wheel, disconnect the wiring harness, unscrew some screws and pop it out.