Measurements needed, please help
#1
Measurements needed, please help
hey guys, have a somewhat odd request, im using a 3speed toploader from a '68 mustang, i want to get a shifter made by a friend. im living in the good old usa for the next couple months and want to take it home to new zealand with me when i go back, trouble is...the gearbox is back home in my workshop and i need to give him a couple measurements to get it made.
as stated its a 3spd toploader from a '68 mustang the one with the aluminum tailhousing, i need the measurement between the upper 2 tailshaft housing bolts (center to center) and the distance from the 2nd&3rd shaft and the 1st&reverse shaft is to the mounting surface of the main case and tailshaft housing. If someone has one kicking around and could spend 5 minutes with a ruler and post up the mesurements... boy id be gratefull! id love to get one of these shifters.
thanks in advance guys! appreciate it!
as stated its a 3spd toploader from a '68 mustang the one with the aluminum tailhousing, i need the measurement between the upper 2 tailshaft housing bolts (center to center) and the distance from the 2nd&3rd shaft and the 1st&reverse shaft is to the mounting surface of the main case and tailshaft housing. If someone has one kicking around and could spend 5 minutes with a ruler and post up the mesurements... boy id be gratefull! id love to get one of these shifters.
thanks in advance guys! appreciate it!
Thread
Thread Starter
Forum
Replies
Last Post
yourmom6990
3.7L V6 Technical Discussions
2
10-14-2015 10:08 PM