Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

ALIVE!!!!

Thread Tools
 
Search this Thread
 
Old 09-08-2013, 06:18 AM
  #1  
Falcopilot
2nd Gear Member
Thread Starter
 
Falcopilot's Avatar
 
Join Date: Jun 2009
Location: North Georgia
Posts: 207
Default ALIVE!!!!

FINALLY, she's ALIVE!!! Started the '68 for the first time after the EFI 5.0 H.O. and AOD swap. Having some issues with the transmission linkage as you'll see in the first crank vid.........OOPS!!! Everything ok though, no damage!! The shifter is in Park and the transmission is in Reverse. LOL!!

HUGE day for our family though!!! My first project car and between my wife , 16yo son and myself (and a little help with wiring last Sunday), ALL of the work was done by US! First time I've ever done ANYTHING like this. And there have been MANY times I was ready to burn the thing to the ground in frustration!! Perserverance!!!

Obviously there are issues to address prior to driving it, but this was the day we've been waiting for, it runs!!!!

This car is for my son to drive to high school this year and next.........my daughter will drive it her junior and senior year when he leaves for college.

Here is the vid of the very first time it fired up.......and the "oops"......


And here is a vid after sorting it out a little better:


Last edited by Falcopilot; 09-08-2013 at 06:22 AM.
Falcopilot is offline  
Old 09-08-2013, 07:46 AM
  #2  
90RunnerRed
2nd Gear Member
 
90RunnerRed's Avatar
 
Join Date: Oct 2008
Location: CO
Posts: 224
Default

Very cool. Congrats on the milestone.
90RunnerRed is offline  
Old 09-08-2013, 08:14 AM
  #3  
fastbackford351
Foghorn Leghorn
 
fastbackford351's Avatar
 
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
Default

Congratulations! Sounds as smooth as a baby's butt.

lol at the shifter faux pas now but you and yours got away with one there. We'll just file that one under 'emergency braking and reflexes exercise".

That thing is going to be a hoot.
fastbackford351 is offline  
Old 09-08-2013, 02:01 PM
  #4  
Falcopilot
2nd Gear Member
Thread Starter
 
Falcopilot's Avatar
 
Join Date: Jun 2009
Location: North Georgia
Posts: 207
Default

Originally Posted by fastbackford351
Congratulations! Sounds as smooth as a baby's butt.

lol at the shifter faux pas now but you and yours got away with one there. We'll just file that one under 'emergency braking and reflexes exercise".

That thing is going to be a hoot.
Thanks!!!

Yeah, tell me about it!! I've had a LOT of issues with the Performance Automatic linkage kit I bought so I could use the stock shifter with the AOD........and this incident is a result of that. Looks like I've got to take the thing apart again. :-(

But right now I'm so happy this thing cranked that I can't stop smiling!!!!

I'm also having an issue with the seal at the fuel tank pickup.....it keeps leaking................I've had it out twice over the last few days and I can't get it to stop!! GRRRRR!!
Falcopilot is offline  
Old 09-08-2013, 03:00 PM
  #5  
musnicki
3rd Gear Member
 
musnicki's Avatar
 
Join Date: Dec 2007
Location: Bangkok, Thailand
Posts: 959
Default

Originally Posted by Falcopilot
I'm also having an issue with the seal at the fuel tank pickup.....it keeps leaking................I've had it out twice over the last few days and I can't get it to stop!! GRRRRR!!
Looks and sounds awesome! As for the seal, did you coat the O ring with some white lithium grease? I had some issues as well when I replaced my tank with a 22 gal tank, I used some vice grips to bend the tabs a little more and used a rubber mallet and chisel (or flat head screwdiver) and gently tapped the lock ring into place.

James
musnicki is offline  
Old 09-08-2013, 05:46 PM
  #6  
Falcopilot
2nd Gear Member
Thread Starter
 
Falcopilot's Avatar
 
Join Date: Jun 2009
Location: North Georgia
Posts: 207
Default

Originally Posted by musnicki
Looks and sounds awesome! As for the seal, did you coat the O ring with some white lithium grease? I had some issues as well when I replaced my tank with a 22 gal tank, I used some vice grips to bend the tabs a little more and used a rubber mallet and chisel (or flat head screwdiver) and gently tapped the lock ring into place.

James

Thanks!!

No on the grease.......when I try again I'll do that.

I used a flathead and mallet for the ring..........gently. :-)
Falcopilot is offline  
Old 09-08-2013, 06:28 PM
  #7  
67Stang68
2nd Gear Member
 
67Stang68's Avatar
 
Join Date: Aug 2006
Posts: 189
Default

Congrats, very cool... just the motivation I need to start the swap on my 68. Thanks for the post.
67Stang68 is offline  
Old 09-08-2013, 07:33 PM
  #8  
Falcopilot
2nd Gear Member
Thread Starter
 
Falcopilot's Avatar
 
Join Date: Jun 2009
Location: North Georgia
Posts: 207
Default

Originally Posted by 67Stang68
Congrats, very cool... just the motivation I need to start the swap on my 68. Thanks for the post.
Thanks!!!

Go for it!!! If I can do this, ANYBODY can, trust me!!
Falcopilot is offline  
Old 09-08-2013, 07:34 PM
  #9  
Falcopilot
2nd Gear Member
Thread Starter
 
Falcopilot's Avatar
 
Join Date: Jun 2009
Location: North Georgia
Posts: 207
Default

Originally Posted by 90RunnerRed
Very cool. Congrats on the milestone.
Thanks!!!
Falcopilot is offline  
Old 09-08-2013, 08:24 PM
  #10  
LCC
4th Gear Member
 
LCC's Avatar
 
Join Date: Oct 2006
Location: Canada
Posts: 1,443
Default

Congratulations..
LCC is offline  


Quick Reply: ALIVE!!!!



All times are GMT -5. The time now is 02:43 PM.