Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

66 Mustang Stalls After About 5-10 Minutes

Thread Tools
 
Search this Thread
 
Old 10-21-2013, 02:43 AM
  #11  
Gun Jam
Moderator
 
Gun Jam's Avatar
 
Join Date: Dec 2005
Location: Hills of California
Posts: 5,208
Default

when it dies pull the boot of the coil and place a wrench above the coil and to a ground.
Crank the engine over and see if you get a spark to jump from the coil to the wrench.

Test it before the engine dies and compare.

Im with stepman on this one. I had an MSD box fail something like you described. The MSD has a self test feature to track down these issues not sure about yours.
Gun Jam is offline  
Old 10-23-2013, 02:47 PM
  #12  
clowe1965
6th Gear Member
 
clowe1965's Avatar
 
Join Date: Aug 2011
Location: South Carolina, Axle swap anyone?
Posts: 5,287
Default

Just don't be holding the wrench when you're doing that.
clowe1965 is offline  
Old 10-28-2013, 02:19 PM
  #13  
fordman84
 
fordman84's Avatar
 
Join Date: Jan 2009
Location: Texas
Posts: 32
Default

Sounds like my old ignition module. Would be running fine, then BOOM...dead as a doornail and wouldn't crank. Let sit for a few minutes, it cools down, and off to the races again. My grandfather said in a pinch I could put ice on the box to cool it down and get it running but I just straight up replaced it before it happened again. It wasn't a mallory kit though, so can't really speak to them with authority...just hearing exactly what happened to me.
fordman84 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fdnyems19
5.0L (1979-1995) Mustang
2
08-13-2015 09:36 AM
stanngg
2005-2014 Mustangs
10
08-12-2015 03:43 PM
daytooday
Motor Swap Section
2
08-11-2015 09:22 AM
01blackgtconv
4.6L (1996-2004 Modular) Mustang
2
08-10-2015 01:25 PM
lrogers0613
2005-2014 Mustangs
1
08-06-2015 10:51 PM



Quick Reply: 66 Mustang Stalls After About 5-10 Minutes



All times are GMT -5. The time now is 07:17 PM.