DejanM31

I want to buy and install 3 point rear seat belts. I want to securely fasten a child seat so the whole familiy can ride in this car (slowly and not far). The seat for a 3 year old is big and wide and my curent 2 point seat bealt can not reach around so i can not fasten it. Any ideas are welcome.
I have a bolt on the left side under the rear bench and on the middle. Dont mind the belt on the photo. I took a 3 point from zhe front and tried to do something with it. Didnt work.

90RunnerRed

Not a 3-point solution, but I just bought a set of these as replacements for the front of mine, and they are quite a bit longer than the originals. I can get a measurement for you if you want...

http://www.cjponyparts.com/seat-belt...-1973/p/DSB-V/

DejanM31

Please do! I need you to measure both parts of the belt. A part without a buckle must be longer from 25,5 inches.

rmodel65

i dont think my 65 even came with rear belts

90RunnerRed

Sorry, the extra length is on the buckle side (37"). The non-buckle side is 25.5 like stock.