mhubert89

COMP Cams Camshaft Small Kit Xtreme Energy XE262H Hydraulic Flat Tappet 1300-5600 RPM 289/302

Do you think its a good small kit.. From cjponyparts comme with ;
Camshaft, lifter , timing chain set and lub for 225$ !?

barnett468

hello;

the cam and springs are fine but you can not run comp lifters, they are not all good. buy crane high rev lifters or howards etc..

mhubert89

Oki i will only buy the cam from that kit !! Thks

mhubert89

I need also a flywheel and a clutch ( maybe a stage 2) .. Do you have any suggestion about this 2 parts sir ?!

barnett468

hi;

yes, a 10 1/2" mcleod 1650 lb 3 finger pressure plate from summit racing and a series 100 disc if you drive casually and a series 500 dual friction if you flog it. small diameter 10 spline shaft if your trans is stock.



.

mhubert89

Never buy from summit i will go to check to find this parts ! Thanks again !!

groho

I've been buying summit for years. They're probably your best bet on availability and pricing. I'm lucky, they're right up the road, order on a tues morning, on my doorstep the next afternoon.

mhubert89

Can you told me wich one that will be better for my engine to buy ! The lifters names ..

thanks
appreciate