Brake Line sizes and adapters?
#1
Brake Line sizes and adapters?
So, I picked up a new Willwood adjustable proportioning valve for my 69 coupe, and have ran into a snag. The original hard lines at the original proportioning block come out to the front brakes through a 3/16 brake line using a 1/2"-20 count tube nut. I originally wanted to just buy a matching 1/2"-20 female to female coupling that will allow me to use a pre fabricated line from Napa to adapt this 1/2 inch line to the wilwood (3/8"-24) block.
Does anyone know where I can find this oddball sizeed 1/2"-20 3/16 tube female to female. Or any suggestions?
I could just use the tube nuts that came with the wilwood and cut/reflare my lines to the 3/8, but I dont want to.. (laziness) Ill probably end up having to do it anyway.
Does anyone know where I can find this oddball sizeed 1/2"-20 3/16 tube female to female. Or any suggestions?
I could just use the tube nuts that came with the wilwood and cut/reflare my lines to the 3/8, but I dont want to.. (laziness) Ill probably end up having to do it anyway.
#4
Went back to napa and decided to just buy some more pre made 3/8 (3/16 tube) lines and just replace what I had. Better choice in the long run and it all works properly. I like the wilwood adjustable bias unit. Very nice!!
Thread
Thread Starter
Forum
Replies
Last Post
NorthAmericanTuning
Vendor For Sale / Group Buy Classifieds
5
11-09-2016 11:45 AM
NorthAmericanTuning
Vendor For Sale / Group Buy Classifieds
3
11-09-2016 11:44 AM
NorthAmericanTuning
S550 2015-2023 Mustang
3
03-18-2016 11:21 AM