Classic Mustangs (Tech)Technical discussions about the Mustangs of yester-year.
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Do you have a 65/66 fastback with rear window trim removed?
I need a few quick measurements if someone out there is working on a 65/66 Fastback with the rear chrome window trim removed.
I need three or four quick measurements for the 65/66 rear window opening. You'd sure be helping save me a ton of time if you can help me out!!
I think it would be easier if you called me and I described where to measure, or send me an email and I can email you back with a drawn picture of what I need.
Thanks in advance,
(in a nutshell, what I need is, right at the inside edge; the centerline "from front of window to the rear", and the top width and bottom width.....say about 3" up from the bottom and 3" down from the top.)
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor