83ttopgt

I have a 351w 9.48 deck block

6.250 rods,

pistons (flat top with valve relief, maybe 3cc relief) 1.19 compression height

4.0 stroke

74 cc cleveland heads (4v)

I am coming up with 9.9 with a .040 head gasket

Correct?

barnett468

9.87:1 with
.030 bore
5.0 cc
.040 deck height
4.0 stroke
4.100 gasket bore

83ttopgt

Do you think it will work?

barnett468

do i think what will work?

83ttopgt

That combo. It leaves the piston .040 below deck and that with a .040 head gasket leaves .080 gap. I know my heads don't have quench pads, but is that an acceptable distance?

barnett468

well, you're kinda screwed with the c heads so it is not ideal and taller postins with a dish would be slightly better but it will "run".

maybe flat tops with some nice 112 racing gas?
.

83ttopgt

trying for pump gas.