When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
When I get home from work I'll check my switch out. I dissassembled my car quite a while ago and can't remember off hand how it came out. Looking at it will refresh my memory.
Nope, no spring loaded clip. The round bezel screws off to remove the switch. I removed mine off the 67 vert and the best way I found was to use a set of vise grips, unhook the wires and turn the switch body to unscrew. I scratched the dash some but the switch looked OK. I ended up buying one from Ron Francis anyways. Cool looking switch.