67 project coupe
#1
67 project coupe
Just bought a 67 coupe to build. Originally came with 200/6. The front end has been upgraded for v-8 and disk brakes. The rear end was changed to a 5 lug but still has drum brakes. I am trying to find a rear end with disc brakes that will bolt in with minimum modifications. Any help on what year and model cars will work. Any and all help is appriciated.
#3
Some good info here though it's for other Ford rears
http://www.therangerstation.com/tech...nversion.shtml
Also these guys sell a nice kit. http://ssbrakes.com/
Their calipers are from 88 to 90..?(I think) continentals
http://www.therangerstation.com/tech...nversion.shtml
Also these guys sell a nice kit. http://ssbrakes.com/
Their calipers are from 88 to 90..?(I think) continentals
Last edited by Mustangdemon67; 07-14-2015 at 09:37 PM.
#4
Started with the same car, also converted to a V8 and I now have 4 way power disc and a Ford 9" rear (small bearing). CSRP up front, Right Stuff Detailing rear disc brake kit:
http://www.summitracing.com/parts/rsd-zdcrd02
I don't have that brakes dialed in just yet, but both kits are quality parts. Still dreading getting the parking brake to work.
When I was looking at options, there was a lot of people running a junkyard swap of a early 2000s Crown Vic. I'd consider going that route the next time around.
http://ynned.tripod.com/crown_vic_discs/index.html
http://www.summitracing.com/parts/rsd-zdcrd02
I don't have that brakes dialed in just yet, but both kits are quality parts. Still dreading getting the parking brake to work.
When I was looking at options, there was a lot of people running a junkyard swap of a early 2000s Crown Vic. I'd consider going that route the next time around.
http://ynned.tripod.com/crown_vic_discs/index.html
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
DreadPirateRoberts
V6 (1994-2004) Mustangs
4
09-26-2015 02:11 PM
tj@steeda
Archive - Mustangs For Sale
0
09-17-2015 07:32 PM