Power steering bracket spacer

Reply Subscribe

Thread Tools

Search this Thread

03-19-2017, 07:52 AM

barrylink

Thread Starter

Join Date: Feb 2017

Location: Alberta

Posts: 22

Power steering bracket spacer

I need to know the size of the spacer on the power steering bracket in a 71 361c mustang cobra jet engine, I'll make one but I don't know the size. Any help is appreciated!

03-19-2017, 09:33 AM

barrylink

Thread Starter

Join Date: Feb 2017

Location: Alberta

Posts: 22

length please

03-24-2017, 08:50 AM

barrylink

Thread Starter

Join Date: Feb 2017

Location: Alberta

Posts: 22

that was a 351cj 1971

04-06-2017, 07:33 PM

boogerschnot

5th Gear Member

Join Date: Feb 2007

Location: Ramona, CA

Posts: 2,682

What do you mean by spacer? Do you have a pic of what youre trying to do?

04-07-2017, 07:19 AM

barrylink

Thread Starter

Join Date: Feb 2017

Location: Alberta

Posts: 22

the spacer is behind the green tape in this photo. It keeps the proper spacing between bracket and head to make sure pulley is aligned

Attached Thumbnails

Power steering bracket spacer-c7aa-3a732-b011.jpg

Last edited by barrylink; 04-07-2017 at 07:22 AM. Reason: and more info

04-09-2017, 06:59 PM

boogerschnot

5th Gear Member

Join Date: Feb 2007

Location: Ramona, CA

Posts: 2,682

Barry, I have a 69 351w with a 5/8 spacer, and a 67 289 with a 1/2 spacer. You may just try a few washers to get it lined up and then measure the space.