You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Could you guys do me a big favor and post your 289 pics? It'd be sweet if they were w/o the air cleaner too so that things are a bit easier to see. All angles are good. I tried google images but there just isn't a whole lot on there. I need them because I really don't know where all these hoses (vaccum, air, etc) go and my shop manual wasn't a whole lot of help. Thanks
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
How many vacuum hoses are there? should be one to the pcv, one to the distributor vac advance, and one to the trans if you have an auto. Am I missing something?
How many vacuum hoses are there? should be one to the pcv, one to the distributor vac advance, and one to the trans if you have an auto. Am I missing something?
I have no clue. There is a lot that isn't there too, so I need to know what to buy and where it will go etc.
How many vacuum hoses are there? should be one to the pcv, one to the distributor vac advance, and one to the trans if you have an auto. Am I missing something?
I have no clue. There is a lot that isn't there too, so I need to know what to buy and where it will go etc.
Power brakes if they've been added
With that - there's only 4 IIRC. get the ones that you're sure of connected then get back to us with the ones you're not sure of. Note their origin and size. Gotta be simple enough.
__________________
Force and Minds are oppisites; morality ends where the gun begins.
How many vacuum hoses are there? should be one to the pcv, one to the distributor vac advance, and one to the trans if you have an auto. Am I missing something?
That's all my recent research came up with too. However I had 2 unused ports on the carb that I finally capped off. (To my dismay, the capping didn't provide any noticable difference!)
-EDIT-
I'll try to post a picture tomorrow that points out which ports go to the PCV, Distributor and Transmission. But it might not be helpful if you don't have a 2100 carb...
Well here ya go.It isnot pretty but maybe it will help you out. When we bought the car it did not run. I got it running but thats about it. Hope this helps.
I hope to start on the engine compartment in the early spring.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Your 289 Engine Pics
