You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I had to use a tie rod separator or a pickle fork and just beat the hell out of it. The stud ended up coming out of the part that goes onto the steering arm and I used a socket and a big C-clamp. It popped and scared the poop out of me but it worked.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
I use my air hammer for all these types of things. Slap in the pickle fork attachment and pull the trigger. That might take a minute but all the vibrations from the air hammer with the pressure from the forks it will pop out.
I had a similar situation where the power steering ram goes into one of the parts (don't know the name. After lots and lots of hitting, my dad and I broke out the torch and heated up all around the hole, after it was nice and toasty we hit it a couple more times and it fell off. If nothing else works out try using a torch around the hole to expand it.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
thanks everybody
