Convertible Tech This section is only for questions or information relating to a convertible. Questions about drivetrain modifications should still be posted in the engine specific sections.
Sponsored by:
Sponsored by:

93 GT convertible problem

Thread Tools
 
Search this Thread
 
Old 09-12-2011, 08:25 PM
  #1  
giostang
Thread Starter
 
giostang's Avatar
 
Join Date: Sep 2011
Location: ontario
Posts: 2
Default 93 GT convertible problem

The canvas was coming off the bottom of the rear window slowly over the last couple of years until it finally detached. So this summer I had the roof and window changed (there were some small cracks in the roof too). Anyways, 1 week after I get it back I put it down for the first time and the window pops. I take it back to the guy and he's surprised because it worked in the shop. He replaces the glass section again. THe glass was almost touching the back seat as it went down but it goes (I see him do it). About 1 week later, I put it down and it pops again! He swears the installation and parts used are good. The roof frame could be off somehow but seems strange, since the original window didn't break. Any thoughts on how to figure this out without risking breaking another window?
giostang is offline  
Old 09-12-2011, 09:00 PM
  #2  
All4One
3rd Gear Member
 
All4One's Avatar
 
Join Date: Sep 2011
Location: TN
Posts: 571
Default

hey, welcome to the forum. what exactly is popping? The glass is coming out of the canvas "sleeve"? or the canvas is coming apart?
All4One is offline  
Old 09-12-2011, 10:09 PM
  #3  
giostang
Thread Starter
 
giostang's Avatar
 
Join Date: Sep 2011
Location: ontario
Posts: 2
Default

by "pop" I meant the glass broke...
giostang is offline  
Old 09-12-2011, 10:31 PM
  #4  
Mustangs4U
3rd Gear Member
 
Mustangs4U's Avatar
 
Join Date: Mar 2008
Location: San Angelo, TX
Posts: 543
Default

I was told that you had to unzip the glass before you put it down.

For this reason I had a clear vinyl piece put in instead. I love it.
Mustangs4U is offline  
Old 09-12-2011, 10:34 PM
  #5  
All4One
3rd Gear Member
 
All4One's Avatar
 
Join Date: Sep 2011
Location: TN
Posts: 571
Default

oh wow, that's crazy. Assuming all he did was replace the glass again, my guess is it will just break again. If it was a frame problem it seems like it would break even when he tests it in the shop.
Just brainstorming, it's gotta be some variable that changes over at least that much time. It could be temperature (getting too hot or cold), glue settling, the elastic stretching.
Maybe you could wait a week, then go have the shop try it again, and have everyone there watch for what may be smashing it.
All4One is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ohfarrell
Motor Swap Section
2
10-18-2015 11:27 PM
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM
spamedic
2005-2014 Mustangs
2
09-09-2015 12:15 AM
5.0 kevo
5.0L (1979-1995) Mustang
6
09-03-2015 06:24 PM



Quick Reply: 93 GT convertible problem



All times are GMT -5. The time now is 12:04 AM.