Detailing Discuss detailing and the appearance of your ride inside and out here.

Can this or will this end the clay bar? - NanoSkin AutoScrub

Thread Tools
 
Search this Thread
 
Old 04-21-2012, 08:26 AM
  #1  
detailersdomain
Former Sponsor
Thread Starter
 
detailersdomain's Avatar
 
Join Date: Sep 2009
Location: NJ
Posts: 526
Default Can this or will this end the clay bar? - NanoSkin AutoScrub

NANOSKIN Autoscrub 6 inch Pad - Better and Faster than Claying



Wow is all I can say about this new tool and new technology. I believe this will change the way most pro detailers and DIYers will prep their cars. This is truly a time saver and will pay for itself after a couple detail jobs. We have spent in some cases 1-2 hours claying and prepping a midsize sedan (in rough shape) we recently tested the AutoScrub on an Audi S8 and we were finished in about 15 minutes! You really won't believe this until you try it yourself. The AutoScrub will make you leave your clay bar behind.

NANOSKIN AutoScrub works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.

A dual action orbital polisher is required. AutoScrub will safely and easily removes paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic.

AutoScrub works great with your favorite detail spray or clay lubricant. Unlike the clay bar, the AutoScrub can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AutoScrub on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it.

AutoScrub allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

Features
- Lasts up to 4 times longer than clay bars
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
- Up to 50-60 uses before you need to replace it

Directions
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Mist sufficient detail spray or clay lubricant onto the surface evenly.
3. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
4. Wipe off residue and move on to compound and polishing or even go straight to your last step.

Important tips:
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- DO NOT use water
- DO NOT use with rotary polisher.

Take a look at the 3 offers we have. Pre Order Pricing is in effect, we should have the first wave by Friday.



NanoSkin AutoScrub 3 inch Kit

NanoSkin AutoScrub 6 inch Kit
Nano Skin AutoScrub 6 Inch Pad

Various photos of how the pad looks and works

3 inch pad kit




6 inch pad on the Griots on an Uber 5 inch backing plate



detailersdomain is offline  
Old 04-22-2012, 08:30 AM
  #2  
shad2009
5th Gear Member
 
shad2009's Avatar
 
Join Date: Mar 2010
Location: Massachusetts
Posts: 2,244
Default

that looks more fun then running a clay bar over a car and folding every other panel haha...i think i'm going to have to try this out
shad2009 is offline  
Old 04-22-2012, 08:59 AM
  #3  
detailersdomain
Former Sponsor
Thread Starter
 
detailersdomain's Avatar
 
Join Date: Sep 2009
Location: NJ
Posts: 526
Default

definitely more fun.
detailersdomain is offline  
Old 04-23-2012, 09:58 PM
  #4  
Lem-06
4th Gear Member
 
Lem-06's Avatar
 
Join Date: Sep 2011
Posts: 1,226
Default

Put my order in for the 6in kit. Some microfiber towels and the adams kit for swirl remover/polish/seal.
Lem-06 is offline  
Old 04-24-2012, 10:41 AM
  #5  
detailersdomain
Former Sponsor
Thread Starter
 
detailersdomain's Avatar
 
Join Date: Sep 2009
Location: NJ
Posts: 526
Default

thanks the order should ship out tomorrow.
detailersdomain is offline  
Old 04-25-2012, 02:42 PM
  #6  
firstcarmustang
1st Gear Member
 
firstcarmustang's Avatar
 
Join Date: Jan 2012
Location: NY
Posts: 52
Default

will this take out iron fillings?
firstcarmustang is offline  
Old 04-25-2012, 02:59 PM
  #7  
detailersdomain
Former Sponsor
Thread Starter
 
detailersdomain's Avatar
 
Join Date: Sep 2009
Location: NJ
Posts: 526
Default

it can and will remove some of the iron contaminants.

but I would say the iron cut or wolfs will do a better job chemically removing the iron deposits.
detailersdomain is offline  
Old 04-25-2012, 05:57 PM
  #8  
Doogie65
4th Gear Member
 
Doogie65's Avatar
 
Join Date: Oct 2008
Location: WI
Posts: 1,898
Default

Mine should be here tomorrow, so I will be trying it out very soon on the DD's.
Doogie65 is offline  
Old 04-25-2012, 07:57 PM
  #9  
detailersdomain
Former Sponsor
Thread Starter
 
detailersdomain's Avatar
 
Join Date: Sep 2009
Location: NJ
Posts: 526
Default

that's great please let me know if you have any questions.

feel free to call me 201-768-1818
detailersdomain is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
flash_xx
S197 Handling Section
14
10-16-2015 07:23 AM
88 orangepeel notch
Street/Strip
4
10-05-2015 09:03 AM
UrS4
S197 Handling Section
10
10-03-2015 06:23 AM
fastbackford351
Classic Mustangs (Tech)
3
10-01-2015 12:24 PM
winner99
Archive - Want To Buy Ads
0
10-01-2015 10:52 AM



Quick Reply: Can this or will this end the clay bar? - NanoSkin AutoScrub



All times are GMT -5. The time now is 02:50 AM.