Mustang engine parts
#1
Mustang engine parts
Heres a few engine parts i dont need anymore.
302 bored .30 over i think its a 1990 Thunderbird block HO, $150.00 FISEBB-14 (casting number)
Comp Cams Xtreme Energy 264 hydraulic roller cam i cant find the cam card for it but i think its a .512 lift it ran in the car for about 100 miles but then went to a new engine. $100
Original crankshaft for the 306 up there. Was told it was turned .10 thousandths $75.00
Water pump that i would guess is for the thunderbird i dont know if it would work on the mustang though. $10.00
Timing chain cover that also came off the thunderbird block $10.00
Double roller timing chain (unknown brand) that was also used only 100 miles or so $20.00
Oil pan that came off the block (same as mustang) its a little dented up but it works. also comes with those shaft things that go on both sides to even out the pressure. $20.00
High Volume Oil Pump that also has around 100 miles or so on it. does not come with pickup or shaft. $20.00
And i also have some valve covers that say (Mustang powered by ford) i never had these on so i do not know if you will have any clearance issues under your intake. could use a little cleaning up $50.00
I also have 7 Keith Black 11 - 1 compression pistons these were in the 306 when i dropped a bolt into the intake which made its way to the combustion chamber and cracked 1 piston. I honestly dont know if these are any good they were in a wheel barrel and banged around so im sure the rings are bad and such. still have rods connected to them. Make me an offer.
If you have any questions or u want pictures just call me at (502) 657-9849 or just email me or whatever on here. I'm Located in Charlestown, Indiana about 20 ,minutes away from Louisville, Kentucky. I can ship everything but the block and possibly the crank. They wont allow me but 5 pics on here so if u wanna see any of the others just let me know i got em ready. Thnaks!! William
302 bored .30 over i think its a 1990 Thunderbird block HO, $150.00 FISEBB-14 (casting number)
Comp Cams Xtreme Energy 264 hydraulic roller cam i cant find the cam card for it but i think its a .512 lift it ran in the car for about 100 miles but then went to a new engine. $100
Original crankshaft for the 306 up there. Was told it was turned .10 thousandths $75.00
Water pump that i would guess is for the thunderbird i dont know if it would work on the mustang though. $10.00
Timing chain cover that also came off the thunderbird block $10.00
Double roller timing chain (unknown brand) that was also used only 100 miles or so $20.00
Oil pan that came off the block (same as mustang) its a little dented up but it works. also comes with those shaft things that go on both sides to even out the pressure. $20.00
High Volume Oil Pump that also has around 100 miles or so on it. does not come with pickup or shaft. $20.00
And i also have some valve covers that say (Mustang powered by ford) i never had these on so i do not know if you will have any clearance issues under your intake. could use a little cleaning up $50.00
I also have 7 Keith Black 11 - 1 compression pistons these were in the 306 when i dropped a bolt into the intake which made its way to the combustion chamber and cracked 1 piston. I honestly dont know if these are any good they were in a wheel barrel and banged around so im sure the rings are bad and such. still have rods connected to them. Make me an offer.
If you have any questions or u want pictures just call me at (502) 657-9849 or just email me or whatever on here. I'm Located in Charlestown, Indiana about 20 ,minutes away from Louisville, Kentucky. I can ship everything but the block and possibly the crank. They wont allow me but 5 pics on here so if u wanna see any of the others just let me know i got em ready. Thnaks!! William
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
10-01-2015 09:11 PM
inyadreems
Archive - Mustangs For Sale
2
08-21-2015 09:10 AM